45kg CO2 Mobile Fire Extinguisher

Original price was: $2,838.66.Current price is: $2,739.00.

45kg CO2 fire extinguisher – trolley mounted – is ideal for fighting electrical fires. This extinguisher is mobile and easily wheeled to provide protection for industrial switchboards, electrical manufacturers, power stations, computer data storage areas, airports or electronics warehouses and factories.



  • 1 x 45kg CO2 Fire Extinguisher
  • 1 x Heavy Duty Trolley
  • 1 x Maintenance Test Tag


    • Add the 2 signs required for installation
    • Inspect then stamp the maintenance tag
SKU: AS-MOB45CO2 Categories: ,


This 45kg mobile CO2 fire extinguisher produces a substance that is non-conductive and non-corrosive. It works by reducing the oxygen available to fuel the fire. It is best suited for use against fires that involve live electrical appliances such as electric motors, pumps, computers and switchboards. Limited usefulness on small flammable liquid fires, and cooking oil fires. This 45kg CO2 Fire Extinguisher will leave no residue after use.

Use to protect

Live electrical appliances: 

  • computers
  • switchboards
  • electric motors
  • pumps
  • servers

Where to use:

  • electrical manufacturers
  • computer servers
  • power stations
  • electronics warehouses
  • electronics factories
  • industrial switchboards

Technical info:

  • Total height: 1540mm
  • Cylinder height: 1500mm
  • Cylinder diameter: 267 mm
  • Minimum wall thickness: 5.5mm
  • Width wheel – wheel: 530mm
  • Nozzle diameter: 5x3mm
  • Hose length: 5 metres
  • Discharge time: >50 seconds
  • Discharge distance: 5 metres

If you have high risk locations with limited access our range of wheeled extinguishers allow you to fight fires from a longer distance giving you protection from heat and fire. Wheeled extinguishers provide you with the ability to quickly move high capacity extinguishers nearer to the fire easily.


  • Easier fire fighting capability
  • Safer fire fighting
  • High quality material and finish


  • Long and non kinking hose with insulated spray nozzle equips you with a direct and better control to fight fire.
  • Our higher than normal industry standard burst pressure for the cylinder and hose safeguards you when fire fighting.
  • A long life and low maintenance costs are assured as our extinguishers are manufactured to the highest quality and include a non rusting safety pin.


CO2 is almost completely non toxic, and leaves no residue after use.

Electrical fires

CO2 does not conduct electricity, and is installation for example transformers, telephone exchanges, electrical switchboards, computers, motors.

Directions for use

Use The 45kg CO2 extinguisher is a compact, mobile unit which can quickly be put to use at a danger zone. Operation Very easy to use. After removing the safety pin, press the operating lever. This lever releases the CO2 and controls its flow rate. By means of a valve located inside the CO2 self closing control valve. In the latter, also features a safety valve that ensures the release of CO2 in the event of excess pressure, notably in the case of prolonged exposure to a temperature above 60°C. Permanent pressure The extinguishing agent, a self-propelling gas, is loaded into the extinguisher during manufacturing. The load is checked accurately by weighing the unit. The extinguisher must be returned to the factory for refilling. Instructions for Use 2.Pull out the safety pin and press the tap lever down firmly 3. Control the flow rate by pressing the nozzle handle

Additional information

Weight 75 kg


There are no reviews yet.

Be the first to review “45kg CO2 Mobile Fire Extinguisher”

Your email address will not be published. Required fields are marked *